No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MD VPN Configuration

Verifying the MD VPN Configuration

After configuring a multicast domain (MD) VPN, verify the Share-Group and multicast tunnel interface (MTI) information about a specified VPN instance.

Procedure

  • Run the display multicast-domain vpn-instance vpn-instance-name share-group [ local ] command to check the Share-Group information about the MD for a specified VPN instance.
  • Run the display pim vpn-instance vpn-instance-name interface mtunnel interface-number [ verbose ] command to check MTI information.

Example

Run the display multicast-domain vpn-instance share-group command to view Share-Group and MTI information.

<HUAWEI> display multicast-domain vpn-instance BLUE share-group
MD local share-group information for VPN-Instance: BLUE
  Share-group: 224.0.2.0
  MTunnel address: 3.3.3.3
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40469

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next