No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling PIM BFD

Enabling PIM BFD

Enable PIM BFD on the devices that set up PIM neighbor relationships.

Context

NOTE:

PIM BFD applies to non-broadcast multiple access (NBMA) interfaces and broadcast interfaces, not MTunnel interfaces.

Perform the following steps on PIM routers that set up neighbor relationships:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run pim bfd enable

    PIM BFD is enabled.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 42737

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next