No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling IP Multicast Routing

Enabling IP Multicast Routing

Enabling IP multicast routing for the public network instance and VPN instance is the first step in configuring multicast VPNs.

Context

IP multicast routing needs to be enabled on every PE on the network.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run multicast routing-enable

    IP multicast routing is enabled in the public network instance.

  3. Run ip vpn-instance vpn-instance-name

    The VPN instance view is displayed.

  4. Run ipv4-family

    The IPv4 address family is enabled for the VPN instance, and the VPN instance IPv4 address family view is displayed.

  5. Run route-distinguisher route-distinguisher

    An RD is configured for the VPN instance IPv4 address family.

  6. Run multicast routing-enable

    IP multicast routing is enabled for the VPN instance IPv4 address family.

  7. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39321

Downloads: 96

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next