No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Operating Status of IGMP

Monitoring the Operating Status of IGMP

To monitor the IGMP operating status, check information about IGMP groups, Source-Specific Multicast (SSM) mapping, IGMP-enabled interfaces, and IGMP routing tables.

Context

Run the following commands in any view to check the IGMP operating status.

Procedure

  • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] group [ group-address | interface interface-type interface-number ] * [ static ] [ verbose ] command to check IGMP group information on an interface.
  • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] group [ group-address | interface interface-type interface-number ] * ssm-mapping [ verbose ] command to check IGMP groups configured with SSM mapping.
  • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] interface [ interface-type interface-number | up | down ] [ verbose ] command to check the configurations and operating status of IGMP on an interface.
  • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] ssm-mapping group [ group-address ] command to check SSM mapping rules of a specified group.
  • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] control-message counters [ interface interface-type interface-number ] [ message-type { query | report } ] command to check statistics about IGMP control messages on a specific or all interfaces.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 42679

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next