No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Multicast Profile

Configuring a Multicast Profile

To authorize multicast users, you must bind a configured multicast list to a created multicast profile.

Context

You can bind a configured multicast list to a created multicast profile and configure authentication for multicast users.

Choose one of the following configurations as required:

  • Configuring a multicast profile on an IPv4 network
  • Configuring a multicast profile on an IPv6 network

Procedure

  • Configuring a multicast profile on an IPv4 network
    1. Run system-view

      The system view is displayed.

    2. Run aaa

      The AAA view is displayed.

    3. Run multicast-profile profile-name

      An IPv4 multicast profile is configured and the IPv4 multicast profile view is displayed.

    4. Run multicast-list { name list-name | list-index start-index end-index }

      An IPv4 multicast list is bound to the IPv4 multicast profile.

    5. Run authentication

      IPv4 multicast user authentication is enabled.

  • Configuring a multicast profile on an IPv6 network
    1. Run system-view

      The system view is displayed.

    2. Run aaa

      The AAA view is displayed.

    3. Run multicast-profile ipv6 profile-name

      An IPv6 multicast profile is configured and the IPv6 multicast profile view is displayed.

    4. Run multicast-list ipv6 { name list-name | list-index start-index [ end-index ] }

      An IPv6 multicast list is bound to the IPv6 multicast profile.

    5. Run authentication

      IPv6 multicast user authentication is enabled.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40746

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next