No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Multicast Device to Send MLD Packets Without the Router-Alert Option

Configuring a Multicast Device to Send MLD Packets Without the Router-Alert Option

If some MLD interfaces on the same network need to receive MLD packets without the Router-Alert option, configure the multicast device connected to the user network segment to send MLD packets without the Router-Alert option.

Context

By default, a router sends MLD packets with the Router-Alert option.

You can perform configurations either globally or on an interface.

  • Global configuration: takes effect on all interfaces.

  • Interface-specific configuration: takes precedence over the global configuration. If an interface-specific configuration is not available, the interface uses the global configuration.

Procedure

  • Globally configure a multicast device to send MLD packets without the Router-Alert option.
    1. Run system-view

      The system view is displayed.

    2. Run mld

      The MLD view is displayed.

    3. Run undo send-router-alert

      The device is configured to send MLD packets without the Router-Alert option.

    4. Run commit

      The configuration is committed.

  • Globally configure an interface on a multicast device to send MLD packets without the Router-Alert option.
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run undo mld send-router-alert

      The interface is configured to send MLD packets without the Router-Alert option.

    4. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39391

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next