No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of PIM-SM Inter-domain Multicast

Verifying the Configuration of PIM-SM Inter-domain Multicast

After configuring PIM-SM inter-domain multicast, verify information about MSDP peers.

Prerequisites

PIM-SM inter-domain multicast has been configured.

Procedure

  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] brief command to check brief information about MSDP peers.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] peer-status [ peer-address ] command to check detailed information about MSDP peers.

Example

Run the display msdp brief command. The command output shows brief information about all the remote MSDP peers, including the number of MSDP peers, MSDP peer addresses, and MSDP connection status.

<HUAWEI> display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
  Configured   Up           Listen       Connect      Shutdown     Down
  2            2            0            0            0            0

  Peer's Address     State     Up/Down time    AS     SA Count   Reset Count
  192.168.2.1        Up        01:07:08        200    8          0
  192.168.4.2        Up        00:06:39        100    13         0

Run the display msdp peer-status [ peer-address ] command. The command output shows detailed information about the specified MSDP peer.

<HUAWEI> display msdp peer-status 10.110.11.11
MSDP Peer Information of VPN-Instance: public net
 MSDP Peer 1.1.1.1, AS 100
   Description:
   Information about connection status:
     State: Up
     Up/down time: 14:41:08
     Resets: 0
     Connection interface: LoopBack0 (1.1.1.3)
     Number of sent/received messages: 867/947
     Number of discarded output messages: 0
     Elapsed time since last connection or counters clear: 14:42:40
   Information about (Source, Group)-based SA filtering policy:
     Import policy: none
     Export policy: none
   Information about SA-Requests:
     Policy to accept SA-Request messages: none
     Sending SA-Requests status: disable
   Minimum TTL to forward SA with encapsulated data: 0
   SAs learned from this peer: 0, SA-cache maximum for the peer: none
   Input queue size: 0, Output queue size: 0
   Counters for MSDP message:
     Count of RPF check failure: 0
     Incoming/outgoing SA messages: 0/0
     Incoming/outgoing SA requests: 0/0
     Incoming/outgoing SA responses: 0/0
     Incoming/outgoing data packets: 0/0
     Peer authentication: none
     Peer authentication: none
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 42729

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next