No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Aging Time for Entries Triggered by Multicast Traffic

(Optional) Setting the Aging Time for Entries Triggered by Multicast Traffic

Setting the aging time for Layer 2 multicast forwarding entries triggered by multicast traffic can balance the forwarding efficiency and system performance.

Context

If a multicast source does not send multicast data for some multicast groups, relevant (S, G) entries need to be deleted. If a device does not receive any multicast data sent by a multicast source to a multicast group within the aging time of the corresponding (S, G) entry triggered by multicast traffic, the device deletes the multicast entry, improving device performance.

Before setting the aging time for entries triggered by multicast traffic, enable IGMP snooping both globally and in a specified VLAN or VSI.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Perform either of the following operations to select VLAN or VPLS networking:

    • Run the vlan vlan-id command to enter the VLAN view.
    • Run the vsi vsi-name [ static ] command to enter the VSI view.

  3. Run l2-multicast source-lifetime lifetime

    The aging time is set for entries triggered by multicast traffic in the VLAN or VSI.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39341

Downloads: 96

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next