No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting the Parameters of SA Messages

Adjusting the Parameters of SA Messages

MSDP peers share (S, G) information by exchanging SA messages. You can configure the capacity of the SA cache, enable the sending of SA Request messages, enable the encapsulation of multicast data into SA messages, and create filtering policies for SA messages and SA Request messages.

Usage Scenario

SA messages carry the following information and are transmitted among multiple RPs.

  • IP address of the source's RP

  • Number of (S, G) entries contained in the message

  • Active (S, G) lists in the domain

Enabling the sending of SA Request message on the local RP and enabling the SA cache function on the remote MSDP peer can shorten the time taken by a receiver to obtain multicast source information.

  • The local RP sends an SA Request message, carrying the required group address, for obtaining the (S, G) list of this group.

  • Upon receipt of the SA Request message, the remote MSDP peer responds with an SA Response message carrying the required (S, G) information.

Pre-configuration Tasks

Before adjusting the parameters of SA messages, complete the following tasks:

Configuration Procedures

Perform one or more of the following configurations as required.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 43931

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next