No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Downstream Multicast Traffic Replication Mode

Configuring the Downstream Multicast Traffic Replication Mode

Downstream multicast traffic can be replicated on the traffic manager (TM) or network processor (NP).


If loopback channel bandwidth resources are insufficient, configure downstream multicast traffic to be replicated on the TM to save the bandwidth resources. Note that this configuration increases resource consumption on the TM and may cause packet loss when the TM buffer resources are insufficient.


  1. Run system-view

    The system view is displayed.

  2. Run multicast egress replication from forwarding-engine to traffic-manager [ slot slot-id ]

    The TM is used to replicate downstream multicast traffic.

Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40713

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next