No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of IPv6 Multicast Forwarding Routing

Monitoring the Running Status of IPv6 Multicast Forwarding Routing

During the routine maintenance of IPv6 multicast routing management, you can run the display commands in any view to know the running of the multicast forwarding table.

Context

In routine maintenance, you can run the following commands in any view to check the running status of IPv6 multicast forwarding.

Procedure

  • Run the display multicast ipv6 forwarding-table [ ipv6-source-address | ipv6-group-address | incoming-interface { interface-type interface-number | register } | outgoing-interface { { exclude | include | match } { interface-type interface-number | register | none } } | slot slot-number | statistics ] * command in any view to check the IPv6 multicast forwarding table.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39375

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next