No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of PIM

Monitoring the Running Status of PIM

You can monitor the PIM running status by checking unicast routes, BSRs, and RPs used by PIM, statistics about PIM control messages, and information about PIM neighbors and the PIM routing table.

Context

You can run the following commands in any view to check the PIM running status.

Procedure

  • Run the display pim [ vpn-instance vpn-instance-name | all-instance ] claimed-route [ source-address ] command in any view to check information about unicast routes used by PIM.
  • Run the display pim [ vpn-instance vpn-instance-name | all-instance ] bsr-info command in any view to check information about a BSR in a PIM-SM domain.
  • Run the display pim [ vpn-instance vpn-instance-name | all-instance ] control-message counters command in any view to check statistics about PIM control messages.
  • Run the display pim [ vpn-instance vpn-instance-name | all-instance ] interface [ interface-type interface-number ] [ verbose ] command in any view to check PIM interfaces.
  • Run the display pim [ vpn-instance vpn-instance-name | all-instance ] neighbor [ interface interface-type interface-number | neighbor-address | verbose ] * command in any view to check information about PIM neighbors.
  • Run the display pim routing-table command in any view to check information about PIM routing tables.

    • display pim [ vpn-instance vpn-instance-name | all-instance ] routing-table [ group-address [ mask { group-mask-length | group-mask } ] | source-address [ mask { source-mask-length | source-mask } ] | incoming-interface { interface-type interface-number | register | through-bgp } | outgoing-interface { include | exclude | match } { interface-type interface-number | register | none | pseudo } | mode { ssm | sm } | flags flag-value | fsm ] * [ outgoing-interface-number [ number ] ]

    • display pim routing-table [ group-address [ mask { group-mask-length | group-mask } ] | source-address [ mask { source-mask-length | source-mask } ] | incoming-interface { interface-type interface-number | register } | outgoing-interface { include | exclude | match } { interface-type interface-number | vpn-instance vpn-instance-name | register | none } | mode { ssm | sm } | flags flag-value | fsm ] * [ outgoing-interface-number [ number ] ]

  • Run the display pim [ vpn-instance vpn-instance-name | all-instance ] rp-info [ group-address ] command in any view to check information about the RP serving the multicast group.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39404

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next