No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Support for Segmented Tunnels in an AS

Configuring the Support for Segmented Tunnels in an AS

To ensure successful transmission of multicast traffic among intra-AS areas that use different types of MPLS protocols for tunnel establishment, configure the support for segmented tunnels in the AS.

Context

If areas in an AS use different types of MPLS protocols for tunnel establishment, configure the NG MVPN's ingress node and the nodes that connect different types of tunnels (tunnel connection nodes) to support segmented tunnels.

Procedure

  • Configure the ingress node.
    1. Run system-view

      The system view is displayed.

    2. Run ip vpn-instance vpn-instance-name

      A VPN instance is created, and its view is displayed.

    3. Run ipv4-family

      The IPv4 address family is enabled for the VPN instance, and the VPN instance IPv4 address family view is displayed.

    4. Run mvpn

      The VPN instance IPv4 address family MVPN view is displayed.

    5. Run inter-area-segmented enable

      The ingress node is configured to support inter-area segmented tunnels in the AS.

    6. Run commit

      The configuration is committed.

  • Configure the tunnel connection node.
  • Run system-view

    The system view is displayed.

  • Run multicast mvpn inter-area-segmented enable

    The tunnel connection node is configured to support inter-area segmented tunnels in the AS.

  • Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40617

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next