No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling PIM Join/Prune Message Packaging

Disabling PIM Join/Prune Message Packaging

Sending Protocol Independent Multicast (PIM) Join/Prune messages in a package increases the rate at which the PIM Join/Prune messages are sent.


The efficiency for sending PIM Join/Prune messages in a package is higher than that for separately sending a large number of PIM Join/Prune messages. By default, a device sends PIM Join/Prune messages in a package. Because the size of a PIM Join/Prune message package is large, devices that have poor performance cannot receive the PIM Join/Prune message package. To prevent packets from being discarded, disable the Join/Prune message packaging function.

Perform the following steps on the router that runs Protocol Independent Multicast Sparse Mode (PIM-SM):


  1. Run system-view

    The system view is displayed.

  2. Run pim [ vpn-instance vpn-instance-name ]

    The PIM view is displayed.

  3. Run join-prune triggered-message-cache disable

    The real-time Join/Prune message packaging function is disabled.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 44115

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next