No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Multicast Routing

Enabling Multicast Routing

Enable multicast routing on a router before you configure other multicast features on the router.

Context

VPN-instance-related configurations need to be performed only on Provider Edges (PEs). If a PE has a VPN instance interface connected to user hosts, you must perform Steps 3 to 6.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run multicast routing-enable

    IP multicast routing is enabled in the public network instance.

    Running the undo multicast routing-enable command will delete all the multicast configurations of the public network or VPN instance and interrupt the multicast service running in the instance. If you want to restore the multicast service in the instance, re-configure multicast commands for which configurations have been deleted.

  3. (Optional) Run ip vpn-instance vpn-instance-name

    The VPN instance view is displayed.

  4. (Optional) Run ipv4-family

    The IPv4 address family is enabled for the VPN instance, and the VPN instance IPv4 address family view is displayed.

  5. (Optional) Run route-distinguisher route-distinguisher

    A Route Distinguisher (RD) is configured for the VPN instance IPv4 address family.

  6. (Optional) Run multicast routing-enable

    IP multicast routing is enabled in the VPN instance.

  7. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39830

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next