No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of MSDP

Monitoring the Running Status of MSDP

You can monitor the MSDP running status by checking brief and detailed information about MSDP peers, (S, G) information in the source active (SA) cache, and the number of (S, G) entries in the SA cache.

Context

You can run the following commands in any view to check the MSDP running status.

Procedure

  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] brief [ state { connect | down | listen | shutdown | up } ] command in any view to check brief information about MSDP peers.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] peer-status [ peer-address ] command in any view to check detailed information about MSDP peers.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] rpf-peer original-rp original-rp-address command in any view to check information about all reverse path forwarding (RPF) peers of a specific source's rendezvous point (RP) address, including RPF peer selection rules and RPF route types.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-cache [ group-address | source-address | { as-number-plain | as-number-dot } ] * command in any view to check (S, G) information in the SA cache.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-count [ as-number-plain | as-number-dot ] command in any view to check the number of (S, G) entries in the SA cache.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] control-message counters [ peer peer-address | message-type { source-active | sa-request | sa-response | keepalive | notification | traceroute-request | traceroute-reply | data-packets | unknown-type } ] * command in any view to check statistics about the received, sent, and discarded MSDP messages.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 43960

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next