Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for IP Multicast Routing Management
Examples for configuring multicast static routes, multicast load splitting, and multicast multi-topology are provided.
- Example for Configuring Multicast Static Routes to Change RPF
Routes
To change the Reverse Path Forwarding (RPF) route and create a multicast path different from the source-to-receiver unicast path, configure multicast static routes on the multicast network. - Example for Configuring Multicast Static Routes to Connect
RPF Routes
After multicast static routes are configured, a receiver can receive multicast data from a multicast source in another area that is unreachable with unicast routes. - Example for Configuring Multicast Load Splitting
On a PIM-SM network where multicast services are stable, configure the stable-preferred multicast load splitting policy so that multicast traffic can be distributed to multiple equal-cost routes for transmission.
Previous
