No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Layer 2 Multicast CAC

Configuring Layer 2 Multicast CAC

Layer 2 multicast Call Admission Control (CAC) is a feature used on a VPLS networking to limit the multicast group number and bandwidth that subscribers can utilize and manage the channels of each service provider. This feature prevents bandwidth resources from exceeding the total bandwidth of the aggregation network and ensures service quality for most subscribers.

Usage Scenario

As IPTV service applications become increasingly popular among consumers, multicast services are widely deployed. The following problems may arise when IPTV services are deployed on a Layer 2 network:

  • Sparsely distributed multicast groups (programs) may increase network deployment burdens.
  • If network bandwidth is insufficient, the aggregation network cannot bear all multicast traffic, which degrades subscribers' image experience.
  • Static multicast group management policies cannot meet the requirements of users to access different multicast services. Service providers expect more refined channel management, for example, they expect to limit the bandwidth of multicast groups in channels.

To solve the preceding problems, Layer 2 multicast CAC can be used to control IPTV services on the aggregation network based on different criteria, including global multicast group number and bandwidth limits, and multicast group number and bandwidth limits for a channel. Layer 2 multicast CAC enables service providers to offer more flexible and refined contents and subscriber-specific policies to ensure service quality for most subscribers.

On the network shown in Figure 18-10, a UPE is downlinked to CEs through a VLAN or VPLS network. Layer 2 multicast CAC can be deployed on the UPE to limit the multicast bandwidth for IPTV channels delivered by the UPE to CEs.

Figure 18-10 Layer 2 multicast CAC networking

Pre-configuration Tasks

Before configuring Layer 2 multicast CAC, complete the following tasks:

  • Connect and configure interfaces correctly to ensure that the link-layer protocol status of the interfaces is Up.

  • Complete basic VSI configurations.

  • Enable IGMP snooping on the device where multicast CAC is to be enabled and for the VSI where the device resides.

Configuration Procedures

Figure 18-11 Flowchart for configuring Layer 2 multicast CAC
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39426

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next