No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IGMP Snooping Proxy Configuration

Verifying the IGMP Snooping Proxy Configuration

After configuring IGMP Snooping Proxy, verify the IGMP Snooping Proxy configuration to verify that the IGMP Snooping Proxy configurations are complete.

Prerequisites

The IGMP Snooping Proxy configurations are complete.

Procedure

  • Run the display igmp-snooping configuration command to check the IGMP Snooping Proxy configuration.

Example

Run the display igmp-snooping configuration command to view the IGMP Snooping Proxy configuration. For example:

<HUAWEI> display igmp-snooping configuration
 IGMP Snooping Configuration for VLAN 10
     igmp-snooping enable
     igmp-snooping query-interval 30
     igmp-snooping max-response-time 15
     igmp-snooping robust-count 3
     igmp-snooping lastmember-queryinterval 2
     igmp-snooping proxy
     igmp-snooping proxy router-protocol-pass
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39043

Downloads: 96

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next