No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Multicast Control

Configuring Multicast Control

With the large-scaled deployment of IPTV services, telecommunication operators have to authenticate users. Users have the rights to access multicast programs (by joining multicast groups) only after they pay the fee.

Usage Scenario

To control the rights of users to join related multicast groups, you can configure controllable multicast. To implement controllable multicast, you can configure a multicast profile, apply the profile to the domain to which the users belong, and enable controllable multicast on a bas interface.

Pre-configuration Tasks

Before configuring controllable multicast, complete the following tasks:

  • Configuring a routing protocol on the backbone network to implement IP interworking

  • Configuring access services to enable users to access the Internet normally

Configuration Procedures

Figure 16-1 Flowchart for Configuring Multicast Control
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 43243

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next