No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Dynamic RP Parameter Configuration

Verifying the Dynamic RP Parameter Configuration

After adjusting dynamic Rendezvous Point (RP) parameters, verify BootStrap router (BSR) and RP information.

Prerequisites

The adjustment of dynamic RP parameters on an IPv6 network is complete as needed.

Procedure

  • Run the display pim ipv6 bsr-info command to check information about a BSR in an IPv6 PIM-SM domain.
  • Run the display pim ipv6 rp-info [ ipv6-group-address ] command to check information about an RP in an IPv6 PIM-SM domain.

Example

Run the display pim ipv6 bsr-info command. You can view information about C-BSRs.

<HUAWEI> display pim ipv6 bsr-info
VPN-Instance: public net
 Elected AdminScope BSR Count: 0
 Elected BSR Address: 2001:db8:1::2
     Priority: 0
     Hash mask length: 64
     State: Elected
     Uptime: 00:00:07
     Next BSR message scheduled at: 00:00:53
     C-RP Count: 0
 Candidate AdminScope BSR Count: 0
 Candidate BSR Address: 2001:db8:1::2
     Priority: 0
     Hash mask length: 64
     State: Elected
     Wait to be BSR: 0

Run the display pim ipv6 rp-info command. You can view information about an RP, including the RP address, RP priority, and range of groups served by the RP.

<HUAWEI> display pim ipv6 rp-info ff0e::1
 VPN-Instance: public net
 BSR RP Address is: 2001:db8:1::2
     Priority: 192
     Uptime: 00:00:52
     Expires: 00:01:38
 RP mapping for this group is: 2001:db8:1::2 (local host)
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39827

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next