No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring DNS-based SSM Mapping

Configuring DNS-based SSM Mapping

This section describes how to configure DNS-based SSM mapping on the multicast device connecting to the user network segment, so that the multicast device can obtain the multicast source corresponding to the multicast group through the DNS server and provide the SSM service for users.

Context

The DNS-based SSM mapping function allows the multicast device enabled with SSM mapping to dynamically obtain the source-group mapping from the DNS server, so that the multicast device provides the SSM service for users in the group.

This function can be configured when each VPN corresponds to an SSM mapping relationship.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run igmp [ vpn-instance vpn-instance-name ]

    The IGMP view is displayed.

  3. Run ssm-mapping query dns [ policy { basic-acl-number | acl-name basic-acl-name ]

    The DNS-based SSM mapping function is enabled.

  4. Run ssm-mapping domain domain-name

    The domain name suffix added to a multicast group address for SSM mapping is specified.

  5. Run igmp static-group group-address source dns-ssm-map

    The function of obtaining the multicast source address from a DNS server is configured.

  6. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40501

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next