No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Routing 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Routing
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining OSPF

Maintaining OSPF

Maintaining OSPF involves resetting OSPF and clearing OSPF statistics.

Clearing OSPF

You can reset OSPF counters.

Context

OSPF information cannot be restored after you clear it. Exercise caution when clearing it.

To clear OSPF information, run the following reset commands in the user view.

Procedure

  • Run the reset ospf [ process-id ] counters [ neighbor [ interface-type interface-number ] [ router-id ] ] command to reset OSPF counters.

    • counters indicates OSPF counters.
    • neighbor indicates neighbor information on the specified interface.

  • Run the reset ospf [ process-id ] counters maxage-lsa command to delete the statistics about router LSAs that have reached the aging time.
  • Run the reset ospf [ process-id ] frr command to perform OSPF IP FRR calculation again.
  • Run the reset ospf [ process-id ] peer [ interface-type interface-number ] router-id command to restart an OSPF neighbor.

Resetting OSPF

Restarting OSPF can reset OSPF.

Context

The OSPF neighbor relationships will be torn down if you run the reset ospf command to reset OSPF connections. Exercise caution when running the command.

To reset OSPF connections, perform the following operation:

Procedure

  • Run the reset ospf [ process-id ] process command to restart the OSPF process.

    After the reset ospf process command is used to restart OSPF, the following situations may occur:

    • If the router ID is changed, the new router ID takes affect after the reset ospf process command is run.
    • The DR and BDR are re-selected after the reset ospf process command is run.

  • Run the reset ospf [ process-id ] spf to recalculate OSPF routes.
  • Run the reset ospf [ process-id ] redistribution to reset OSPF route redistribution.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055018

Views: 54055

Downloads: 209

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next