No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - IP Routing 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Routing
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying Route-Filters

Applying Route-Filters

After a route-filter is created, it must be referenced by a route-policy to take effect.


Currently, route-filters apply to OSPF/OSPFv3, RIP/RIPng, IS-IS, BGP/BGP4+. Perform one or more of the following configurations as required:


Updated: 2019-01-03

Document ID: EDOC1100055018

Views: 54358

Downloads: 209

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next