No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling the IPv6 QoS Local ID Matching Mode

(Optional) Enabling the IPv6 QoS Local ID Matching Mode

If a matching rule based on the IPv6 QoS policy ID is defined, the rule can take effect only after the IPv6 QoS local ID matching mode is enabled.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run traffic policy policy-name

    The view of the traffic policy is displayed.

  3. Run match-type ipv6 qos-local-id enable

    The IPv6 QoS local ID matching mode is enabled.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 23470

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next