No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Binding a QoS Profile and a Service Identification Policy to a BAS Interface

Binding a QoS Profile and a Service Identification Policy to a BAS Interface

You can apply a QoS profile to a type of user packets on an interface to perform HQoS for the user packets based on the scheduling parameters. You can also bind a service identification policy to the interface so that packets that meet specified conditions can be mapped to the domain for authentication.

Context

NOTE:

Applying a QoS profile to an interface functions differently from applying a QoS profile to a domain. The parameters about the bandwidth allocated to family users are obtained through the QoS profile applied to the interface while the parameters about the bandwidth allocated based on service types are obtained through the QoS profile applied to the domain.

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run bas

    The BAS interface view is displayed.

  4. Run access-type

    The BAS interface type is configured.

  5. (Option) Run user-bandwidth auto-adapt enable

    To configure automatic peak information rate (PIR) bandwidth adjustment for DHCPv4, DHCPv6 and PPPoE users.

  6. Choose the matched command line to apply QoS profiles based on types of user packets.

    • Run the qos-profile qos-profile-name [ inbound | outbound ] [ identifier { none | option82 | access-line-id | pe-vid | ce-vid | pe-ce-vid | vlan-id } ] [ group group-name ] [ session-limit max-session-number ] command to apply a QoS profile to Layer 3 user packets and specify a family user identification mode.
    • Run the qos-profile qos-profile-name [ inbound | outbound ] vlan vlan-id1 [ to vlan-id2 ] [ identifier { vlan-id | none | option82 | access-line-id } ] [ group group-name ] [ session-limit max-session-number ] command to apply a QoS profile to VLAN user packets and specify a family user identification mode.
    • Run the qos-profile qos-profile-name [ inbound | outbound ] pe-vid pe-vid1 ce-vid ce-vid1 [ to ce-vid2 ] [ identifier { pe-vid | ce-vid | pe-ce-vid | none | option82 | access-line-id } ] [ group group-name ] [ session-limit max-session-number ] command to apply a QoS profile to QinQ user packets and specify a family user identification mode.
    • (Optional) Run the option82-identify_include_static-user command to insert Option 82 for static users so that static users can be identified using a QoS profile.
    NOTE:

    Each SQ can be mapped to only one GQ.

  7. Run service-identify-policy policy-name

    A service identification policy is bound to the BAS interface.

  8. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 26265

Downloads: 121

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next