No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Defining a Traffic Policy

Defining a Traffic Policy

After defining traffic classifiers and traffic behaviors, you need to configure a traffic policy in which the traffic classifiers and traffic behaviors are associated.

Context

Do as follows on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run traffic policy policy-name

    A traffic policy is defined and the traffic policy view is displayed.

  3. Run classifier classifier-name [ { source | destination } { user-group | service-group } group-name ] behavior behavior-name [ precedence precedence-value ]

    A traffic behavior is specified for the specified traffic classifier in the traffic policy and the precedence of the traffic policy is also specified.

  4. (Option) Run step step-number

    The step between policies is specified.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22392

Downloads: 115

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next