No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional)Configuring Grade-based Bandwidth Adjustment

(Optional)Configuring Grade-based Bandwidth Adjustment

You can configure grade-based bandwidth adjustment to optimize SQ resource usage.

Context

The allowed sum of CIRs or PIRs of SQs on a device cannot be infinite. Therefore, if the sum of CIRs or PIRs of SQs has reached the maximum processing performance of the device, the user that is applying for SQ resources is prone to request denies. To resolve such problems, you can configure grade-based bandwidth adjustment to supplement bandwidth or reclaim bandwidth in real time so that SQ resource usage is optimized and bandwidth is guaranteed.

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run slot slot-id

    The slot view is displayed.

  3. Run qos bandwidth-adjustment { degrade-cycle cycle-num | upgrade-cycle cycle-num | monitor-number monitor-number | adjust-number adjust-number | disable-percent disable-value enable-percent enable-value | upgrade-threshold upgrade-value degrade-threshold degrade-value [ inbound | outbound ] }

    Parameters for grade-based bandwidth adjustment are configured.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22023

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next