No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Scheduling Parameters for a GQ

(Optional) Configuring Scheduling Parameters for a GQ

The shaping rate can be set for a GQ to limit the volume of GQ traffic and prevent GQ traffic burst. In this case, traffic can be evenly sent.


Do as follows on the router:


  1. Run system-view

    The system view is displayed.

  2. Run user-group-queue group-name

    The specified GQ view is displayed.

  3. Run shaping shaping-value [ pbs pbs-value ] { inbound | outbound }

    The shaping value is set for the GQ.

    When traffic shaping is not configured for the GQ, the system performs no traffic shaping by default.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 30682

Downloads: 146

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next