No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of HQoS on a Low-speed Interface

Verifying the Configuration of HQoS on a Low-speed Interface

After HQoS is configured on an Ethernet interface, you can view the configuration parameters of an FQ mapping object and the referential relations of the object, configuration parameters of a GQ and the referential relations, and statistics about the SQ, GQ, and CQ on specified interfaces.

Procedure

  • Run the display flow-mapping configuration [ verbose [ mapping-name ] ] command to check the configurations of a flow queue mapping object and the referential relationships of the object.
  • Run the display flow-queue configuration [ verbose [ flow-queue-name ] ] command to check the configuration of a flow queue template.
  • Run the display flow-wred configuration [ verbose [ flow-wred-name ] ] command to check the configurations of a flow queue WRED object.
  • Run the display user-queue configuration interface interface-type interface-number [ inbound | outbound ] command to check the HQoS configuration on interfaces.
  • Run the display user-group-queue configuration [ verbose [ group-name ] ] command to check the configuration of a GQ and the referential relationships.
  • Run the display port-wred configuration [ verbose [ port-wred-name ] ] command to check the configured parameters of a CQ WRED object.
  • Run the display port-queue configuration interface interface-type interface-number outbound command to check the detailed configuration of a CQ.
  • Run the display user-queue statistics interface interface-type interface-number { inbound | outbound } command to check the statistics of an SQ on a specified interface.
  • Run the display user-group-queue statistics user-group-name statistics [ group group-name ] [ slot slot-id ] { inbound | outbound } command to check statistics on a GQ.
  • Run the display port-queue statistics interface interface-type interface-number [ cos-value ] outbound command to check the statistics of a CQ.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 21974

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next