No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the HQoS Function to Be Implemented on the eTM for Access Users on VE Interfaces

(Optional) Configuring the HQoS Function to Be Implemented on the eTM for Access Users on VE Interfaces

Context

Perform the following steps on a VE interface:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface virtual-ethernet interface-number

    A VE interface is created and the VE interface view is displayed.

  3. Run ve-group ve-group-id l3-access

  4. Run access-user loop-back on-card

    The HQoS function is configured to be implemented on the eTM for access users on VE interfaces.

    This command is supported only on an LUPI-120-E/LPUI-240-E or on an LPUF-120/LPUF-240 that is equipped with the P52-E/P51-H/P120-E/P120-H/P240-E/P240-H.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22622

Downloads: 115

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next