No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Specifying the Domain of a User-group

Specifying the Domain of a User-group

You need to create a domain to which a user group belongs and specify certain users for whom UCL-based traffic policies are implemented in the domain.

Context

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run domain

    The AAA domain view is displayed.

  4. Run user-group user-group-name

    The domain to which the user-group belongs is specified.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 30172

Downloads: 141

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next