No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying UCL-based Traffic Policies

Applying UCL-based Traffic Policies

After the UCL-based traffic policies are applied, the traffic of all online users is classified according to the UCL rules.

Context

Perform the following steps on the router:

This configuration task is supported only on the Admin-VS.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run traffic-policy policy-name { inbound | outbound }

    A traffic policy is applied to online users.

    After the UCL-based traffic policy is applied in the system view, the traffic of all online users is classified according to the UCL.

    When traffic policies are configured in both the system view and the interface view, on the network side, the traffic policies that are configured in the interface view take effect, whereas on the user side, UCL-based traffic policies take effect.

    NOTE:
    For the LPUF-50/LPUF-50-L/LPUI-21-L/LPUI-51-L/LPUF-51/LPUF-51-B/LPUI-51/LPUI-51-B/LPUI-51-S/LPUS-51/LPUF-101/LPUF-101-B/LPUI-101/LPUI-101-B/LPUS-101/LPUF-51-E/LPUI-51-E/LPUI-51-CM/LPUF-120/LPUF-120-B/LPUF-120-E/LPUI-102-E/LPUI-120/LPUI-120-B/LPUI-120-L/LPUI-52-E/LPUI-120-E/LPUI-120-CM/LPUF-240/LPUF-240-B/LPUF-240-E/LPUI-240/LPUI-240-B/LPUI-240-CM/LPUI-240-L/LPUF-480/LPUF-480-B/LPUI-480/LPUI-480-B/LPUI-480-L/LPUF-480-E/LPUI-480-CM/LPUI-200/LPUI-200-L/LPUF-200/LPUF-200-B/LPUI-1T/LPUI-1T-B/LPUI-1T-L/LPUI-1T-CM/LPUI-2T/LPUI-2T-B/LPUI-2T-CM boards,
    • You can run the traffic-policy match-type destination-user inbound command to configure the UCL-based traffic policy to take effect.
    • You can run the traffic-policy match-type interface-acl command to configure the ACL-based traffic policy to take effect.

      This configuration task is supported only on the Admin-VS.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 25637

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next