No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying a GQ Profile to a VLAN

Applying a GQ Profile to a VLAN

You can define a GQ profile and apply it to a VLAN to schedule user group queues.

Context

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run user-vlan { { start-vlan-id [ end-vlan-id ] [ qinq start-pe-vlan [ end-pe-vlan ] ] } | any-other }

    The user-VLAN view is displayed.

  3. Run user-group-queue user-group-queue-name [ identifier identifier ] outbound [ group groupname ]

    A user group queue is configured for VLAN users.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 21994

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next