No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Global Traffic Policy and Enabling Global QPPB

Configuring a Global Traffic Policy and Enabling Global QPPB

A global traffic policy must be configured for global QPPB implementation.

Context

To implement global QPPB, configure a global traffic policy and configure QoS policy ID-based rules in the traffic classifier.

For detailed traffic policy configurations, see Class-based QoS Configuration.

This configuration is supported only on the Admin VS.

Procedure

  1. Define a traffic classifier based on Layer 3 or Layer 4 information.
    1. Run system-view

      The system view is displayed.

    2. Run traffic classifier classifier-name [ operator { and | or } ]

      A traffic classifier is defined, and the traffic classifier view is displayed.

    3. Run if-match qos-local-id qos-local-id

      A QoS policy ID-based rule is configured in the traffic classifier.

    4. Run commit

      The configuration is committed.

  2. Define a traffic behavior and configure actions.

    For details, see Defining a Traffic Behavior and Configuring Actions.

  3. Define a traffic policy and configure traffic behaviors.

    For details, see Defining a Policy and Specifying a Behavior for a Classifier in the Policy.

  4. Run system-view

    The system view is displayed.

  5. Run traffic-policy policy-name { inbound | outbound } global-acl

    A global traffic policy is configured.

  6. Run qppb qos-local-id { source | destination }

    Global QPPB is enabled.

  7. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 25820

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next