No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Mapping from an FQ to a CQ

(Optional) Configuring a Mapping from an FQ to a CQ

You can define a mapping from an FQ to a CQ rather than adopt the default mapping to set the priority of a type of service in an SQ entering a CQ.


Do as follows on the router:


  1. Run system-view

    The system view is displayed.

  2. Run flow-mapping mapping-name

    The flow mapping view is displayed.

  3. Run map flow-queue cos-value to port-queue cos-value

    The priority mapping from a flow queue to a CQ is set.


    You can configure eight mappings from flow queues to port queues in one flow queue mapping profile.

    When no mapping from the flow queue to the CQ is set, the system defaults the one-to-one mapping.

    Users can create multiple flow-mapping profiles for being referenced by SQs as required. You can configure up to 15 flow-mapping profiles in the system.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 30696

Downloads: 146

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next