No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Last-Mile QoS Mode and Setting the Adjustment Value of the Size of Remote Packets

Configuring the Last-Mile QoS Mode and Setting the Adjustment Value of the Size of Remote Packets

The device can adjust the link bandwidth based on the types of links between the user and DSLAM.

Context

The NE40E can implement the last-mile QoS on two types of links.

Therefore, it selects the mode of last-mile QoS according to the type of the links on the two ends of the DSLAM. If users are accessed through PPPoE, the mode of last-mile QoS should be frame.

The NE40E supports the configuration of the adjustment value of the size of remote packets in both the interface view and the AAA domain. The configuration in the AAA domain view takes effect for only the L2TP service.

Perform the following steps on the router:

Procedure

  • Configuring the last-mile QoS mode and setting the adjustment value of the size of remote packets in the interface view
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run qos link-adjustment shaping-mode { frame | cell }

      The last-mile QoS mode is configured.

    4. Run qos link-adjustment adjust-value remote

      The adjustment value of the size of remote packets is set.

    5. Run commit

      The configuration is committed.

  • Configuring the last-mile QoS mode and setting the adjustment value of the size of remote packets in the AAA domain view
    1. Run system-view

      The system view is displayed.

    2. Run aaa

      The AAA view is displayed.

    3. Run domain domain-name

      The AAA domain view is displayed.

    4. Run qos link-adjustment shaping-mode { frame | cell }

      The last-mile QoS mode is configured.

    5. Run qos link-adjustment adjust-value remote

      The adjustment value of the size of remote packets is set.

      The configuration in the AAA domain view takes effect for only the L2TP service. If the adjustment value is configured in both the interface view and the AAA domain view, the configuration in the AAA domain view takes effect.

    6. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 21955

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next