No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring QPPB Local Policies on a BGP Route Receiver

Configuring QPPB Local Policies on a BGP Route Receiver

QPPB allows QoS policies to be configured for routes that match the BGP community list, ACL, or BGP AS_Path list. After the QPPB local policy is applied to the inbound and outbound interfaces of traffic, relevant QoS policies are performed on the traffic.


Do as follows on a BGP route receiver:


  1. Run system-view

    The system view is displayed.

  2. Run qppb local-policy policy-name

    A QPPB local policy is created and the QPPB local policy view is displayed.

  3. Run (Optional)statistics enable

    Enable QPPB statistics.

  4. Run (Optional)service-class outbound enable

    Enable the service-class function of a QPPB local policy in the outbound direction.

  5. Run qos-local-id qos-local-id behavior behavior-name

    A QoS local policy ID is bound to a traffic behavior.

  6. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 25487

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next