No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of HQoS Scheduling for Family Users

Verifying the Configuration of HQoS Scheduling for Family Users

After HQoS is configured for family users, you can view information about the online users with specified IDs and the bandwidth consumed by them and applications of the QoS profile.

Context

Run the following commands to check the previous configuration.

Procedure

  1. Run the display qos user-id user-id command to check the traffic statistics on the eight subscriber queues (SQs) of a specified user.

    This command is supported only on the Admin VS.

  2. Run the display qos-profile configuration [ profile-name ] command to check the configuration about a QoS profile.
  3. Run the display qos-profile application profile-name command to check applications of a QoS profile.
  4. Run the display qos scheduling-mode slot slot-id to check the scheduling mode of a board.
  5. Run the display qos resource sub-port-queue slot slot-id { inbound | outbound } command to check the usage of sub-interface queues.
  6. Run the display sub-port-queue configuration [ verbose [ sub-port-queue-name ] ] command to check information about sub-interface queues.
  7. Run the display sub-port-queue statistics interface interface-type interface-number outbound command to check statistics about sub-interface queues.
  8. Run the display qos bandwidth-adjustment information [ verbose ] command to check information about the resource usage and bandwidth adjustment on a specific board.

    This command is supported only on the Admin VS.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 25814

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next