No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Defining a Traffic Behavior and Configuring Traffic Policing Actions

Defining a Traffic Behavior and Configuring Traffic Policing Actions

Configure traffic policing actions for difference traffic classifier.

Context

Do as follows on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run traffic behavior behavior-name

    A traffic behavior is configured and the traffic behavior view is displayed.

  3. Run car { cir cir-value [ pir pir-value ] } [ cbs cbs-value [ pbs pbs-value ] ] [ adjust adjust-vlaue ] [ green { discard | pass [ remark dscp dscp-value | service-class class color color ] } | yellow { discard | pass [ remark dscp dscp-value | service-class class color color ] } | red { discard | pass [ remark dscp dscp-value | service-class class color color ] } ] * [ summary ] [ color-aware ] [ limit-type pps ]

    A traffic policing action is configured.

    In Step 3, choose parameters according to your requirement:

    • To configure traffic policing with a single token bucket, select cir and cbs, and set the value of pbs to 0.

    • To configure traffic policing with double token buckets, select cir, cbs, and pbs.

    • To configure traffic policing with dual rates and dual token buckets, select cir, pir, cbs, and pbs.

    • The cir and pir are expressed in kbit/s, the cbs and pbs are expressed in bytes.

  4. Run commit

    The configuration is committed.

  5. (Optional) Run quit

    Return to the system view.

  6. (Optional) Run domain domain-name

    The AAA domain view is displayed.

Follow-up Procedure

The NE40E supports the re-marking of the priority and color of packets after traffic policing. If the class of service value of a packet is re-marked to EF, BE, CS6, or CS7, its color can only be re-marked to green.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 25640

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next