No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Service Identification Policy

Configuring a Service Identification Policy

Service identification enables the system to determine which authentication domain is used based on the information about some fields carried in user packets.

Context

The NE40E supports the following service identification modes. You can select the mode as required.
  • Service identification based on VLAN IDs in inner or outer VLAN tags

  • Service identification based on 802.1p values in inner or outer VLAN tags

  • Service identification based on DSCP values

  • Service identification based on DHCP Option 60 information

Procedure

  • Configuring service identification based on VLAN IDs in inner or outer VLAN tags
    1. Run system-view

      The system view is displayed.

    2. Run service-identify-policy policy-name

      A service identification policy is created and the service identification policy view is displayed.

    3. Run service-identify { inner-vlan | outer-vlan }

      The service identification mode is configured.

    4. Run vlan start-vlan-id [ to end-vlan-id ] domain domain-name

      The packets with a specified VLAN ID are mapped a domain.

    5. Run commit

      The configuration is committed.

  • Configuring service identification based on 802.1p values in inner or outer VLAN tags

    This configuration task is supported only on the Admin-VS.

    1. Run system-view

      The system view is displayed.

    2. Run service-identify-policy policy-name

      A service identification policy is created and the service identification policy view is displayed.

    3. Run service-identify 8021p { inner-vlan | outer-vlan }

      The service identification mode is configured.

    4. Run 8021p start-8021p-value [ end-8021p-value ] domain domain-name

      The packets with a specified 802.1p value in the inner or outer VLAN tag are mapped to a domain.

    5. Run commit

      The configuration is committed.

  • Configuring service identification based on DSCP values
    1. Run system-view

      The system view is displayed.

    2. Run service-identify-policy policy-name

      A service identification policy is created and the service identification policy view is displayed.

    3. Run service-identify dscp

      The service identification mode is configured.

    4. Run dscp start-dscp-value [ end-dscp-value ] domain domain-name

      The packets with a specified DSCP value are mapped to a domain.

    5. Run commit

      The configuration is committed.

  • Configuring service identification based on DHCP Option 60 information
    1. Run system-view

      The system view is displayed.

    2. Run service-identify-policy policy-name

      A service identification policy is created and the service identification policy view is displayed.

    3. Run service-identify dhcp-option60

      The service identification mode is configured.

    4. (Optional) Run option60 partial-matchOr vendor-class partial-match

      Partial matching of the VENDOR-CLASS(DHCPv4 OPTION60/DHCPv6 OPTION16) information is configured.

      The command option60 partial-match is supported only on the Admin VS.

    5. (Optional) Run option-60 partial-info { cn | { sub-option sub-option-code | offset offset | length length }* } or vendor-class partial-info { cn | [ offset offset ] { length length | sub-option sub-option-code [ sub-offset sub-offset ] [ sub-length sub-length ] } }

      Part of the vendor-class (DHCPv4 option60/DHCPv6 option16) attribute is used to identify services.

    6. (Optional) Run option60 encryptOr vendor-class encrypt

      Encrypt the Option 60 field value is configured.

    7. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 23210

Downloads: 115

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next