No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Queue Statistics

Clearing Queue Statistics

This section describes how to clear statistics about a specified GQ, a specified SQ on a specified interface, a QoS profile on a specified interface, and SQs of the eight priorities of a specified user.

Context

Queue statistics cannot be restored after you clear it. So, confirm the action before you use the command.

Make sure that you would clear the queue statistics and run the reset command in the user view to clear the existing queue statistics.

Procedure

  • Run the reset user-group-queue group-name statistics slot { slot-id | all } { inbound | outbound } command to clear statistics on a specified GQ.
  • Run the reset user-queue statistics interface interface-type interface-number { inbound | outbound } command to clear statistics of a specified SQ on a specified interface.
  • Run the reset qos-profile statistics interface interface-type interface-number [ [ vlan vlan-id ] | [ pe-vid pe-vid ce-vid ce-vid ] ] { inbound | outbound } command to clear statistics of the QoS template on a specified interface.
  • Run the reset port-queue statistics [ slot slot-id | interface interface-type interface-number ] [ cos-value ] outbound command to clear statistics of the port-queue on a specified interface.

    The parameter slot is supported only on the Admin-VS.

  • Run the reset user-group-queue statistics interface interface-type interface-number [ pe-vid pe-vid ce-vid ce-vid | vlan vlan-id ] { inbound | outbound } command to clear the statistics about a specified GQ in a specified interface.
  • Run the reset qos user-id user-id { inbound | outbound } command to clear eight SQ statistics of a specified user.

    This command is supported only on the Admin VS.

  • Run the reset sub-port-queue statistics interface-type interface-number outbound command to clear the statistics about sub-interface queues.
  • Run the reset qos-profile statistics vni vni-id { inbound | outbound } command to clear the statistics about a QoS profile on a specified VNI.
  • Run the reset qos-profile statistics vni vni-id { inbound | outbound } source sourceip peer peerip command to clear the statistics about a QoS profile on a specified NVE interface.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 23510

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next