No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Source-Based QPPB

Verifying the Configuration of Source-Based QPPB

After QPPB is configured, you can view QPPB information.

Context

You can run the display commands in any view to check QPPB running information. For details about QPPB running information, see the chapter "QoS Commands" in the HUAWEI NetEngine40E Universal Service Router Command Reference.

Procedure

  1. Run the display qppb local-policy configuration policy-name command to check the configuration of a specific QPPB local policy.
  2. Run the display qppb local-policy statistics interface interface-type interface-number { inbound | outbound } [ qos-local-id qos-local-id ] { inbound | outbound } command to check the statistics about a specific QPPB local policy.

Example

After QPPB is configured successfully:

  • Run the display qppb local-policy configuration command to view the configuration of a specific QPPB local policy. For example:

    <HUAWEI> display qppb local-policy configuration policy1
    qppb local-policy : policy1
     statistics enable
     qos-local-id 1 behavior test
    
  • Run the display qppb local-policy statistics command, you can view statistics about a specific QPPB local policy. For example:

    <HUAWEI> display qppb local-policy statistics interface gigabitethernet 1/0/0 outbound
    Interface: GigabitEthernet1/0/0
    qppb local-policy outbound: policy1
    qos-local-id 1
    Item                             Packets                      Bytes
    -------------------------------------------------------------------
    Matched                                0                          0
    
    Current CAR statistics: 
    Item                             Packets                      Bytes
    -------------------------------------------------------------------
    Green                                  0                          0
    Yellow                                 0                          0
    Red                                    0                          0
    Passed                                 0                          0
    Dropped                                0                          0
    
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22047

Downloads: 114

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next