No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Multicast Shaping

Verifying the Configuration of Multicast Shaping

After multicast shaping is configured, you can view information about the online users with specified IDs and the bandwidth consumed by them and applications of the QoS profile.


Run the following commands to check the previous configuration.


  1. Using the display multicast-list [ group-list-name ] command to check the configuration of the multicast shaping list.


  • By running the display multicast-list command, you can view the detailed information about the multicast shaping list.

    <HUAWEI> display multicast-list list1
      Multicast-list name  : list1
      Index                : 0
      Source IP/mask       :
      Group IP/mask        :
      Group vpn-instance   : --
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22491

Downloads: 115

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next