No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Function of Multicast Shaping

Enabling the Function of Multicast Shaping

When a multicast source is busy, excessive jitter may occur. In this case, you can configure multicast shaping to limit the jitter of the multicast source to a reasonable range.

Context

The function of multicast shaping can be enabled globally or at an interface. If multicast shaping is enabled globally on the router, that means the function is enabled at all interfaces.

Procedure

  • Enabling the function of multicast shaping globally
    1. Run system-view

      The system view is displayed.

    2. Run multicast shaping enable

      Multicast shaping is enabled.

  • Enabling the function of multicast shaping at an interface
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run multicast shaping enable

      Multicast shaping is enabled.

    4. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22372

Downloads: 115

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next