No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After configuring last-mile QoS functions, check the configurations.

Context

Run the following command to check the last-mile QoS configuration.

Procedure

  1. Run the display qos link-adjustment configuration [ interface interface-type interface-number ] command to check the last-mile QoS configuration on an interface.

Example

  • Run the display qos link-adjustment configuration [ interface interface-type interface-number ] command. The command output shows the last-mile QoS configuration on the specified interface.

    <HUAWEI> display qos link-adjustment configuration interface gigabitethernet1/0/0
    Qos link-adjustment configuration information show :
    GigabitEthernet1/0/0:
     Link-layer(1): exclude
     Shaping-mode: cell 
     Adjust-value(Remote): 0
    
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22590

Downloads: 115

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next