No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Profile-based HQoS

Verifying the Configuration of Profile-based HQoS

After profile-based HQoS is configured on an interface, you can view information about queues and packet statistics on the interface.

Procedure

  • Run the display flow-mapping configuration [ verbose [ mapping-name ] ] command to check the configurations of a flow queue mapping object and the referential relationships of the object.
  • Run the display flow-queue configuration [ verbose [ flow-queue-name ] ] command to check the configuration of a flow queue template.
  • Run the display flow-wred configuration [ verbose [ flow-wred-name ] ] command to check the configurations of a flow queue WRED object.
  • Run the display user-group-queue configuration [ verbose [ group-name ] ] command to check the configurations of a user group queue and its referential relationships.
  • Run the display user-group-queue statistics user-group-name statistics [ group group-name ] [ slot slot-id ] { inbound | outbound } command to check statistics on a GQ.
  • Run the display port-wred configuration [ verbose [ port-wred-name ] ] command to check the configurations of a class queue WRED object.
  • Run the display port-queue configuration interface interface-type interface-number outbound command to check the configurations of a class queue.
  • Run the display qos-profile configuration [ profile-name ] command to check the configurations of a QoS profile.
  • Run the display qos-profile application profile-name command to check the applications of a QoS profile.
  • Run the display qos-profile statistics interface interface-type interface-number [ [ vlan vlan-id ] | [ pe-vid pe-vid ce-vid ce-vid ] ] { inbound | outbound } command to check the statistics about a QoS profile.
  • Run the monitor qos-profile statistics interface { interface-name | interface-type interface-number } [ vlan vlan-id | pe-vid pe-vid ce-vid ce-vid | vid vid-id | ce-vid ce-vid | vid vid-id ce-vid ce-vid ] { inbound | outbound } [ interval seconds [ repeat repeat ] command to monitor QoS profile statistics.
  • Run the display port-queue statistics [ slot slot-id | interface interface-type interface-number ] [ cos-value ] outbound command to check the statistics of a CQ.
  • Run the display user-group-queue statistics interface interface-type interface-number [ vlan vlan-id |pe-vid pe-vid ce-vid ce-vid ] { inbound | outbound } command to display user group queue statistics.
  • Run the display qos resource user-group-queue slot slot-id { inbound | outbound }} command to display the usage of user group queues on an LPU.
  • Run the display qos resource user-queue slot slot-id { inbound | outbound } command to display the usage of user queues on an LPU.
  • Run the display qos resource sub-port-queue slot slot-id { inbound | outbound } command to check the usage of sub-interface queues.
  • Run the display sub-port-queue configuration [ verbose [ sub-port-queue-name ] ] command to check information about sub-interface queues.
  • Run the display sub-port-queue statistics interface interface-type interface-number outbound command to check statistics about sub-interface queues.
  • Run the display qos scheduling-mode slot slot-id to check the scheduling mode of a board.
  • Run the display queue-4cos-mapping configuration [ verbose ] command to check configurations of 4-CoS flow queue profiles, including the number and names of used profiles.

    This command is supported only on the Admin VS.

  • Run the display qos bandwidth-adjustment information [ verbose ] command to check information about the resource usage and bandwidth adjustment on a specific board.

    This command is supported only on the Admin VS.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 30973

Downloads: 146

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next