No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring an Interface to Dynamically Adjust the Traffic Shaping Rate

(Optional) Configuring an Interface to Dynamically Adjust the Traffic Shaping Rate

The device can dynamically adjust the traffic shaping rate based on physical interface bandwidth changes caused by the status change (between Up and Down) of member links.

Context

The port-queue dynamic command can be configured only on an MP-group interface or a global MP-group interface.

Perform the following steps on the router.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run port-queue dynamic

    The device is enabled to dynamically adjust the traffic shaping rate when link bandwidth changes due to the status changes (between Up and Down) of member links.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 25641

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next