No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Modifying User Queue Scheduling Parameters

(Optional) Modifying User Queue Scheduling Parameters

This section describes how to modify user queue scheduling parameters.

Context

If the CIR of traffic exceeds the interface bandwidth and traffic congestion occurs, modify the CIR, PIR, CBS, PBS, and weight values.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number [.sub-interface-number]

    The interface or sub-interface view is displayed.

  3. Run qos default user-queue { cir cir-value | pir pir-value | cbs cbs-value | pbs pbs-value | weight weight-value } * outbound

    The user queue scheduling parameters are modified.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 23161

Downloads: 115

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next