No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Dynamic Update of a QoS Profile

(Optional) Configuring Dynamic Update of a QoS Profile

When the QoS profile applied by online users is changed, the previously configured QoS profile for the domain to which the online users belong does not take effect.



This configuration task is supported only on the Admin-VS.

To enable an online user to modify the in-use QoS profile, you need to configure dynamic update of the QoS profile. After this function is configured, the QoS profile being used by the user is changed to the profile defined in the update qos-profile command and the original QoS profile applied to the user domain no longer takes effect.

Dynamic update of the QoS profile takes effect for only service traffic of the user. The QoS profile for family users cannot be updated. That is only the QoS profile applied in domain can be updated but the QoS profile applied in interface cannot be updated.

Perform the following steps on the router:


  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run update qos-profile user-id user-id profile qos-profile-name { inbound | outbound }

    Dynamic update of the QoS profile is configured.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 21943

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next